When caulking your windows, doors, or areas in the kitchen, you need to ensure that you know the right way to proceed. Not knowing what type of caulk to use or how to use the caulk gun properly can lead to a waste of time and money. You may find it better to use a professional caulking service to get desired results. In case you are willing to do it yourself, you should pay attention to the following things first.
- Do not forget to tape before you proceed with caulking. Many people often overlook this important point and end up getting less-than-perfect results. You can make use of painter’s tape here – using it would make it easier to control caulk lines. You should remove the tape immediately after applying the caulk and smoothing the joint.
- Always opt for the caulk appropriate for the job. Interestingly, you will find a variety of caulks to choose from, and it can be quite confusing to make the right decision. To make it easier, you need to learn about four basic types of caulks – latex, polyurethane, elastomeric, and silicone. They all have their pros and cons and are suitable for specific caulking jobs. Silicone caulks are usually the best for kitchen and bath because you can also get them antimicrobial additives. For interior trim, you can put your money on latex caulks. Roofing requires a rubberized or elastomeric product because it can withstand harsh weather conditions. Finally, you can buy polyurethane caulks to deal with windows, siding, and doors – it is a good choice here because it will not shrink and is easy to paint.
- Take your time to select the right caulk gun. You have to understand that different types of caulk guns are capable of achieving different results, and they come with different price tags too. Do not automatically assume that the most expensive gun is going to be the best as well. You will be better off putting your money on a gun with ratchet action than friction action. Avoid a gun that does not come with a hook. Be sure to select a gun with the right kind of length too.
- Learn to apply the caulk properly. When you are applying the caulk, ensure that you do not try to pull it out. Instead, push it gently into the gap to ensure that it adheres to both surfaces. Pulling is not going to produce the similar results. However, you may consider pulling it in case you are dealing with flush surfaces.
- Take special care when cutting tips. Most people think that you should be cutting the tip at an angle, which usually works just fine. However, if you ask a professional caulking service provider, they would recommend cutting the tip off straight to avoid limiting the positions in which you can use your caulk gun.
Bear all these points in mind before you even decide to handle a caulking job on your own. When in doubt, avoid taking charge of things and let a professional do it on your behalf.